Hot Flush

Easy to use, thorough cleaning equals best results!

 

We hereby introduce a sensational Oil cooler and heat exchange flusher already in use by the vehicle and transmission manufacturers, aviation industry, space industry in the US very successfully. We, at Hetzel Automotive Technology, have been using this very reliable system in our workshop for many years.

Our mechanics could no longer do without it because with this device, we achieve the best and most thorough flushing of an oil cooler, you can imagine. The simple operation and user friendly nature of the equipment, provides a most effective cleaning of Oil coolers and ensures the highest quality of the gear change functions.

There are similar systems available in the market but none offers the quality and results of the Hot Flush. For instance, a unique feature of Hot Flush is, that the system works with oil heated to 95 ° An actual real vehicle environment. The heat causes the vessels to expand, and the hot oil can drain. In addition, air is intermittently and in regular intervals passed through the radiator and so are the trapped dirt particles removed. This oil / contamination mixture flows through a special, close-meshed filter which is viewed in the upper part of the flushing system. With the contamination being visible, it is easy for the mechanic to decide if further rinsing should be done. After a rinse with the Hot Flush, each cooler is thoroughly cleaned and checked for leaks at the same time. The innovative and efficient method of Hot Flush, allows it to outperform all other flush devices.


Hot Flush: An unique oil cooler flushing device.


For instance, a unique feature of Hot Flush is, that the system works with oil heated to 95 ° An actual real vehicle environment. Computer controlled and with high pressure the hot oil is pumped through the cooler. In regular intervals. This operation is than briefly stopped, the flow direction reversed, resulting in all impurities from the oil cooler collected. The heat causes the vessels to expand, and the hot oil can drain. In addition, air is intermittently and in regular intervals passed through the radiator and so are the trapped dirt particles removed. This oil / contamination mixture flows through a special, close-meshed filter which is viewed in the upper part of the flushing system. With the contamination being visible, it is easy for the mechanic to decide if further rinsing should be done. After a rinse with the Hot Flush, each cooler is thoroughly cleaned and checked for leaks at the same time. The innovative and efficient method of Hot Flush, allows it to outperform all other flush devices. Other simple types of cooler flushers, such as Can foam cleaners, can not remove the gear oil additive remains, and, these products can not remove hard particles and dissolve them. The extent of the contamination of Oil coolers is thus not measurable and therefore the risk is high that remaining contamination remains in the oil flow of the transmission. Because of this, if the contamination is not removed, immediately will damage the gearbox again resulting in more repairs, costing time and money. On the side of Hot Flush a display indicates the flow rate. This makes it easy to determine whether the cooler or its lines are clogged. With the "Clean-Out" button, you can create a short, sharp boost resulting in removing large contamination from this high pressure boost. The rinse times can be set from 15 - 30 minutes and up to 1 - 3 hours. Therefore, the HotFlush can be adjusted to accommodate any level of contamination. The Hot Flush has so many advantages over other flushing methods, that you do not want to miss out having this machine in your workshop! The use of this simple flushing device saves you money in the long run!


Why is it so important to flush an Oil cooler for Transmissions?

Automatic Transmissions often produce unwanted dirt particles, which are located in the oil circulation system throughout the transmission.These metallic abrasions, splinters and frictions spread to the transmission, torque converters, oil lines and in the heat exchanger / oil cooler. During the repair of the automatic transmission all parts are thoroughly cleaned to eliminate these contaminants but unfortunately, it often does not remove conteminants completely. To insure that all impurities are eliminated, the oil cooler or heat exchanger must be used in this cleaning process. Hard to reach areas of the transmission, such as the oil cooler, can not be inspected with the naked eye. It is because of this that damage can result. Even if the repair or maintenance of an automatic transmission is carefully performed, remaining dirt particles that are already in the oil can damage the transmission within a short time. To save the customer and yourself this trouble, The Hot Flush will pay for itself within a very short time and has a short ROI.


We are happy to invite you for a demonstration of Hot Flush so that you can convince yourself with the capabilities of this system.

E-Mail Formular